Used Economy Cage Totes
These used totes range from units used once to multiple times and can have the odd ding on the cage, but are generally in good condition and may have been rinsed clean or contain some surface residue depending what was previously stored in them. BARR does not handle totes that have handled paints, petroleum products, difficult or hazardous chemicals unless they have been completely and properly cleaned and rinsed inside. Some used totes may contain small amounts of food and beverage ingredients.
A variety of adapter inlet and outlet fittings and vents are available from BARR. Bottom Drain Valve fitting adapters (commonly 2" size) need to be chosen after the specific totes are chosen as the used totes can come with a variety of different fitting types. A variety of bases are also available, as these totes are sources from multiple manufacturers and could have wood, steel, composite, or other bases.
Availability: full truckloads or less, from BARR Plastics facility (BC, Canada).
These used totes range from units used once to multiple times and can have the odd ding on the cage, but are generally in good condition and may have been...
These used totes range from units used once to multiple times and can have the odd ding on the cage, but are generally in good condition and may have been rinsed clean or contain some surface residue depending what was previously stored in them. BARR does not handle totes that have handled paints, petroleum products, difficult or hazardous chemicals unless they have been completely and properly cleaned and rinsed inside. Some used totes may contain small amounts of food and beverage ingredients.
A variety of adapter inlet and outlet fittings and vents are available from BARR. Bottom Drain Valve fitting adapters (commonly 2" size) need to be chosen after the specific totes are chosen as the used totes can come with a variety of different fitting types. A variety of bases are also available, as these totes are sources from multiple manufacturers and could have wood, steel, composite, or other bases.
Availability: full truckloads or less, from BARR Plastics facility (BC, Canada).
Height: " | Width: " | Length: "
Capacity | Part # / Drawing | Dia./ Width | Length | Height | Fill/Discharge Opening | Weight (lbs) | |||
---|---|---|---|---|---|---|---|---|---|
USG | IG | LTR | Premium Weight 1.5-1.7 SG | Heavy Weight 1.9 SG | |||||
275 | 230 | 1040 | 1000L-UT | N/A | 40" | 48" | 46" | Fill 6" / Discharge 2" | 144 |
330 | 275 | 1250 | 1250L-UT | N/A | 40" | 48" | 46" | Fill 6" / Discharge 2" | 144 |
Accessories
Part # | Box Quantity | Description |
---|---|---|
WSF210 | 24 | 2" Poly Spinweld Valve w/ QDC Outlet (Santoprene Gasket) |
WSMT210 | 24 | 2" Poly Spinwled Valve w/ NPT Outlet (Santoprene Gasket) |
TL650E | 1 | 6" Solid Tank Lid w/ EPDM Gasket |
TL651E | 1 | 6" Tank Lid w/ Unvented 2" Plug w/ EPDM Gasket |
TL652S | 1 | 6" Tank Lid w/ Vented 2" Plug w/ Santoprene Gasket |
TL652E | 1 | 6" Tank Lid w/ Vented 2" Plug w/ EPDM Gasket |
TA283 | 1 | 2" Buttress x 2" Male NPT Threads w/ Santoprene Gasket |
TA283QD | 1 | 2" Buttress x 2" Male Adapter QDC w/ Santoprene Gasket |
201FPT | 1 | 2" Female NPT Cap |
60FDIN | 1 | 60MM DIN Cap (Buttress Thread) |
V20207 | 1 | 11" Polyurethane Lanyard |
200CAP | 1 | 2" Camlock Dust Cap |
202CAP | 1 | 2" Camlock Dust Cap |
760DOTV | 2" | Combination Pressure / Vacuum Vent Valve w/ Viton Gasket, 4.0PSI Pressure Relief |
ANTPW34 | 1 | 2" FPT x 3/4" MGHT |
AQDW34 | 1 | 2" FC x 3/4" MGHT |
ABFW34 | 1 | 2" Female Buttress x 3/4" MGHT |
A2BF2NM | 1 | 2" Female Buttress x 2" BSP |
A2BFQD2-E | 1 | 2" Female Buttress x 2" MC |