6” multi-impeller submersible pump for clean water, designed for pressurization, rainwater re-use, gardening and irrigation in residential building service. The pump is ideal for use in rainwater recovery systems and to increase the water pressure. Available as manual or automatic model. The automatic version is a single-phase pump with a float switch for protection against dry running with the need for a control panel. The pump has an in built starting capacitor and the motor has integrated overheating protection. Equipped with stainless steel debris filter, a non-return valve and a 49 ft (15 m) power cable with power plug. Renewed to further increase reliability and the ergonomics (the handle has been completely redesigned). The pumps is supplied as standard with a four-section step fitting and a 1" M/F check valve.
Flow rate maximum: from 4.4 to 23.8 GPM(1 m3/h to 5,4 m3/h)
Head up to: 151 ft (46 m)
Maximum immersion depth: 39 ft (12 m)
Type of pumped liquid: clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallized and chemically neutral
Minimum and maximum ambient temperature: 32°F / +95°F (0°C / +35°C)
Maximum number of starts: 20/h
Impeller/s material: technopolymer
49 ft (15 m)
Possible type of installation: fixed or portable in vertical position
Special versions on request: cables of different lengths, different plug
