Aluminum MC x MPT Type F Adapters
Camlocks are ideal where frequent and fast connections are required on fluid transfer lines (no camlock materials or styles are designed for use with compressed air, gases or steam). BARR's Standard Camlock Gaskets are made of Buna-N Nitrile to resist water and low aromatic petroleum products. Remember to always confirm if gasket material is compatible with fluid.
These camlocks are manufactured from a high quality aluminum alloy and feature 304 stainless steel pins, impact/wear resistant forged brass arms, plated steel finger rings, and a sand-cast body finish. They are heat treated to provide greater durability and are made to strict tolerances to ensure a leak proof seal (i.e. they meet MIL SPEC 27487, A-A-59326 American Standard and DIN2828 German Standard in sizes 3/4" to 6" and will interchange with others that meet these specifications).
Rated Working Pressure at 20°C (70°F) for 1/2" to 2" sizes=250 PSI. For 2-1/2" sizes=150 PSI. 3" =125 PSI, 4"=100 PSI, 5"-6"=75 PSI and 8" = 50 PSI. Temperature Range: As a guide only, aluminum may be suitable for -150°F to +250°F.
Camlocks are ideal where frequent and fast connections are required on fluid transfer lines (no camlock materials or styles are designed for use with compressed air, gases or steam). BARR's...
Camlocks are ideal where frequent and fast connections are required on fluid transfer lines (no camlock materials or styles are designed for use with compressed air, gases or steam). BARR's Standard Camlock Gaskets are made of Buna-N Nitrile to resist water and low aromatic petroleum products. Remember to always confirm if gasket material is compatible with fluid.
These camlocks are manufactured from a high quality aluminum alloy and feature 304 stainless steel pins, impact/wear resistant forged brass arms, plated steel finger rings, and a sand-cast body finish. They are heat treated to provide greater durability and are made to strict tolerances to ensure a leak proof seal (i.e. they meet MIL SPEC 27487, A-A-59326 American Standard and DIN2828 German Standard in sizes 3/4" to 6" and will interchange with others that meet these specifications).
Rated Working Pressure at 20°C (70°F) for 1/2" to 2" sizes=250 PSI. For 2-1/2" sizes=150 PSI. 3" =125 PSI, 4"=100 PSI, 5"-6"=75 PSI and 8" = 50 PSI. Temperature Range: As a guide only, aluminum may be suitable for -150°F to +250°F.
Couldn't load pickup availability
| Part # | Size (in) | Box/Case Qty. | Description |
|---|---|---|---|
| N47-050AL | 1/2 | 1 | Aluminum MC x MPT Type F Adapter |
| N47-075AL | 34 | 1 | Aluminum MC x MPT Type F Adapter |
| N47-100AL | 1 | 1 | Aluminum MC x MPT Type F Adapter |
| N47-125AL | 1-1/4 | 1 | Aluminum MC x MPT Type F Adapter |
| N47-150AL | 1-1/2 | 1 | Aluminum MC x MPT Type F Adapter |
| N47-200AL | 2 | 1 | Aluminum MC x MPT Type F Adapter |
| N47-250AL | 2-1/2 | 1 | Aluminum MC x MPT Type F Adapter |
| N47-300AL | 3 | 1 | Aluminum MC x MPT Type F Adapter |
| N47-400AL | 4 | 1 | Aluminum MC x MPT Type F Adapter |